Unicorn Shimmer Balm

This DIY is adapted from the original recipe posted by Rebecca’s Soap Deli. You can find their version here! I’ve taken the directions pretty much word for word, so I can’t claim any originality here. I did make substitutions that I will explain, and I converted to metric because I work in metric. 

DIY Unicorn Body Balm

I picked Ingredients to give a more dry and silky feel, you can change your butter, oils, and emulsifier to suit yourself. 

Ingredients:

40g grapeseed oil

24g fractionated coconut oil 

28g emulsifying wax (I used BTMS 225; I ordered 225 by accident instead of BTMS 50 and am finding creative places to use it. In this balm, it should help leave a silky after feel on the skin. You could use Emulsifying Wax NF for a heavier feel, or Ecomulse for a powdery finish)

24g Mango butter (once again, chosen because it feels dry and silky when rubbed it. Go with shea or sal butter for something more creamy)

10g cyclomethicone and dimethicone mixture (from LotionCrafters)

0.5 gram vitamin e oil 

4g skin safe fragrance oil of choice

1 teaspoon arrowroot powder (cornstarch will work)

1/4 teaspoon each of three mica colors of choice 

3/8-3/4th of a teaspoon flashing pearl, shimmer pearl or silvery white pearl mica

Instructions:
You will need a digital scale for this project. A regular kitchen or postal scale will work for this particular project. I use an inexpensive Ozeri scale I bought off Amazon for under $20 and has served me well. 
Begin by weighing out the mango butter and emulsifying wax. Combine in a large glass Pyrex measuring cup, then melt in the microwave at 50% power. (Alternately you may also use a double boiler.)

Add cyclomethicone/dimethicone mix and stir well. Using a measuring spoon, measure out one level teaspoon of arrowroot powder. Stir or whisk into the melted mango butter and emulsifying wax until the arrowroot powder has dissolved and there are no clumps.
Next, weigh out the grapeseed oil and fractionated coconut oil. Stir or whisk into your DIY unicorn balm mixture.
You can substitute the grapeseed oil with another carrier oil if desired such as sweet almond, or use all fractionated coconut oil. Just be sure it is liquid at room temperature. If you are substituting the fractionated coconut oil, choose another liquid at room temperature dry oil for best results. Other dry oils I like are rosehip seed oil, hemp seed oil, and especially hazelnut oil.
If you using a fragrance oil, weigh out and stir in the fragrance. You can also use an essential oil or essential oil blend of your choice.
Now divide the DIY unicorn balm base into three containers. Each container should have 38g in it. 
Using a measuring spoon, add 1/4 teaspoon of your first mica color to one container of the unicorn balm. Stir well to combine. Repeat with a 1/4 teaspoon of the next mica color in the second container, and then add 1/4 teaspoon of your third mica color to the last and final container, mixing after each addition. (Please note you do not want to use lake dyes for this project.). 

Now add 1/8 teaspoon of your flashing pearl, shimmer pearl or silvery white pearl mica to each of the three colors. This will give skin a very subtle shimmer. For more obvious shimmer, increase the amount used to suit. Stir each container well to ensure all of the mica is thoroughly combined in each container. You can also add microfine glitter, either in shades to match each color or just holographic to work with them all. 

Once the individually colored DIY unicorn balms start to solidify from a liquid state, stir again. Then scoop one of the colors into your container(s) so it fills 1/3rd of the container(s) you are using.

Repeat with the rest of the colors until your container(s) are filled.

Now use a mini spatula or the flat side of a knife or a spoon to swirl the top layer of the DIY unicorn balm. Finally, dust the top of your unicorn balm with the Diamond Dust, white or pearl mica.  Allow the unicorn balm to completely set up, then gently smooth the tops with the back of a spoon. Screw on the lids to your containers. Your completed DIY unicorn balm will have the consistency of a cream or thick lotion.

Makes 130g or 4 oz. 
This is so luxurious! And although it goes on green and purple, once you rub it in, the color fades and the shimmer is barely noticeable as well. I couldn’t even capture any shimmer on a photo after I slathered my arm in the balm:

Overall I’m very happy with this. You could easily make it with shea butter and Ecomulse for a richer butter with a powdery finish. That’s the next combination I’m going to try, and see how it comes out. I think I will stick with grapeseed oil since it absorbs quickly, and fractionated coconut oil or another dry oil. I have plenty of the coconut so I’ll stick with that for now. 

I’ll have this listed in the Etsy shop shortly for anyone who doesn’t want to make it themselves. 

Advertisements

Author: scseery

Soap, bath and beauty, jams and jellies, and unique upcycled gifts. That's what I make and talk about here. A lot.

2 thoughts on “Unicorn Shimmer Balm”

  1. Thanks for sharing your unicorn balms you made with my recipe! Be sure to shoot me an email once you have yours listed in your etsy shop and I’ll link up to them in my tutorial! Have a great weekend!

    Like

    1. No, thank you for sharing such a fun recipe! I had a great time putting it together, and it was easy to scale up to several jars and to convert into metric.
      I hope I gave you enough credit in my phrasing and the way I linked things. I don’t want to be accused of intellectual theft, ever. I appreciate the hard work that goes into developing a new idea.

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s